Alternatively, you may choose to remove the batteries yourself:
To avoid a possible electric shock hazard, unplug cord (if used) from electrical outlet and shaver.
Run the shaver until the motor stops.
Remove head assembly by first pressing the two side buttons. (Fig. K)
Un-clip the top metal bracket by prying the lower back edge over the snap. Lift the lip of the rubber boot off the
housing. (Fig. L)
Pry off the front panel. (Fig. M)
Remove the two screws securing the cord opening. (Fig. N)
Squeeze the front housing and pull the back off to expose the PCB and batteries. (Fig. O)
Pry the PCB assembly out of the shaver housing (Fig. P)
Cut or break the wire straps on both ends of the batteries, pry the batteries from the foam adhesive tape on the
PCB. (Fig. Q)
Dispose of batteries with extreme care.
SERVICE AND WARRANTY
This product has been checked and is free of defects. We warrant this product against any defects that are due to
faulty material or workmanship for a 2 year period from the original date of consumer purchase. If the product
should become defective within the warranty period, we will repair any such defect or elect to replace the
product or any part of it without charge provided there is proof of purchase. This does not mean an extension of
the warranty period.
In the case of a warranty simply call the Remington
®
Service Center.
This warranty is offered over and above your normal statutory rights.
The warranty shall apply in all countries in which our product was sold via an authorised dealer.
This warranty does not include shaving heads / foils and cutters which are consumable parts. Also not covered
is damage to the product by accident or misuse, abuse, alteration to the product or use inconsistent with the
technical and/or safety instructions required. This warranty shall not apply if the product has been dismantled or
repaired by a person not authorised by us.
ENGLISH
6
080086_REM_IFU_MS2291-2391 _UK.indd gb6
080086_REM_IFU_MS2291-2391 _UK.indd gb6
26.02.2008 15:48:55 Uhr
26.02.2008 15:48:55 Uhr
