38
Troubleshooting
PROBLEM
POSSIBLE
CAUSE
WHAT YOU SHOULD DO
A light flash
is not
emitted
when I press
the FLASH
BUTTON.
You have not
waited enough
time between
flashes for the
bulb to recover.
The system requires about 2 seconds to recover
between flashes. When your i-Light® Pro system
is ready to flash (and assuming the SKIN CONTACT
SENSORS are flush against the skin), the system will
emit three “BEEPS” to confirm that it is ready to flash.
The DISPOSABLE
CARTRIDGE has
flashed 1,500
times and needs
to be replaced.
You should see
the Light Bulb
flashing YELLOW.
Make sure that the CARTRIDGE STATUS INDICATOR
LIGHT is either solid green or solid yellow. If it is
flashing yellow, disconnect the system and replace
the DISPOSABLE CARTRIDGE. Refer to “Replacing the
DISPOSABLE CARTRIDGE” on page 33.
Cartridge has
misflashed.
Occasionally the cartridge may misflash. Attempt to flash
5 more times. If still no flash, disconnect the system and
replace the DISPOSABLE CARTRIDGE. Refer to "Replacing
the DISPOSABLE CARTRIDGE" on page 33.
The cartridge is
damaged.
If the unit emits a "chirp" but does not flash the disposable
cartridge may be damaged. Disconnect the system and
replace the DISPOSABLE CARTRIDGE. Refer to "Replacing
the DISPOSABLE CARTRIDGE" on page 33.
