32
Cleaning Your i-Light® Pro System
After each session, it is recommended
that you clean your system, especially
the HAND PIECE, the FLASH WINDOW, the
SKIN CONTACT SENSORS, and the SKIN
TONE SENSOR window.
DO NOT
place any part of the device
in water or other liquids. If any part of the
device gets wet,
DO NOT
USE
. Contact
Customer Service (see page 44) for help.
As with any electrical device, a wet sys-
tem could cause electrocution or electric
shock.
• Make sure the device is turned off.
Remove the POWER CORD from the
BASE UNIT and Wall Socket before
cleaning.
• Use a clean, lint-free cloth (one is
provided with the unit) to gently wipe
the surface and especially the NOSE
CONE, FLASH WINDOW, SKIN CONTACT
SENSORS and the SKIN TONE SENSOR
window. If needed, you can dampen the
USER MAINTENANCE INSTRUCTIONS
cloth with water and mild soap. Allow
the unit to dry completely before using
again.
• Inspect the vents in the unit and hand-
piece for lint and debris. Vacuum out
periodically.
• If you still need to remove dirt or debris,
you can use your fingernail or a firm
piece of plastic like a credit card. Be
careful not to damage the FLASH
WINDOW.
DO NOT attempt to open or repair
your i-Light® Pro system. Contact cus-
tomer service for more information
(see page 44).
