background image

20

Note:

•  You should complete your first three treatments over the first month to ensure that 

you have hit all hairs in the growth phase in the targeted area.

•  After the third treatment it’s important to continue your treatments only as-needed to 

target hairs that have recently entered the active cycle.

•  Repeat the process for every body part with unwanted hair.

Immediately 

After First 

Treatment

1 to 2 Weeks 

After Initial  

Treatments

One Month  

After Initial 

Treatments

Three Months 

After Initial 

Treatments 

Completed

• There will be no 

visible change to 

the hair or appear-

ance of the skin.
• On occasion, 

some users 

experience mild 

redness that  

usually dissipates 

within a few hours.

• Hairs in treated 

area will begin to 

fall out gradually. 

• You should see a 

noticeable reduction 

in hair re-growth in 

the treated area. 
• Any hair re-growth 

should be lighter  

and finer.

• Enjoy the  

freedom!
• Only use i-Light® 

Pro IPL system for 

occasional  

touch-ups where 

necessary.

Treatment Expectations 

Figure 2

What to Expect with the i-Light® Pro IPL System

Summary of Contents for iLIGHT PRO IPL6000COS













































Reviews:

Related manuals for iLIGHT PRO IPL6000COS