26
setting is selected. After reaching
Level 5, pressing the ENERGY LEVEL
SELECTION BUTTON an additional time
will reset to Level 1.
Note:
• Periodically, the hand piece or base unit
will hit a certain temperature and will go
into a cool down state and temporarily
stop working. The COOL DOWN MODE
INDICATOR will flash and the unit will
beep. Simply wait for the system to regu-
late itself to the appropriate temperature.
The light will turn off and you will be able
to continue treatment.
• The number of flashes delivered before
the cool down state initiates depends
on several factors, including energy
level, how fast you apply the treat-
ments, and the room temperature.
Energy Level
1
2
3
4
5
Press Energy
Level Setting
Button
Defaults to Level
1 upon start-up.
Energy Level
Selection Display
Lights:
Figure 3
1.
Upon start-up, the system sets itself to
the lowest energy level (Level 1). The
system is now ready.
2.
To change the energy level press
the ENERGY LEVEL SELECTION
BUTTON to increase the energy level
until the desired energy level is set.
Selection Display lights will coincide
with the energy level setting. For
example, pressing the ENERGY LEVEL
SELECTION BUTTON once will increase
from Level 1 to Level 2; pressing
another time will increase to Level 3.
3.
If a higher energy level was previously
selected and a lower energy level
is desired, continue to press the
ENERGY LEVEL SELECTION BUTTON
until the desired lower energy
Using the i-Light® Pro IPL System Every Time
