![background image](http://html.mh-extra.com/html/remington/hc4110/hc4110_manual_1437844005.webp)
5
INSTRUCTIONS FOR USE
BEFORE STARTING THE CUT
• Inspect the clipper making sure that it is free from hair and dirt.
• Seat the person so that their head is approximately at your eye level.
• Before cutting, always comb the hair so it is tangle free and dry.
INSTRUCTIONS FOR CUTTING HAIR
• For even cutting, allow the comb attachment/blade to cut its way through the hair. Do
not force it through quickly. If you are cutting for the first time, start with the maximum
comb attachment.
STEP 1 – Nape of the neck
• Attach the 3mm or 6mm guide comb
• Hold the clipper with the blade teeth pointing upwards. Begin starting at the centre of
the head at the base of the neck.
• Slowly lift the clipper, working upwards and outwards through the hair, trimming just a
little at a time.
STEP 2 – Back of the head
• With the 9mm or 12mm guide comb attached, cut the hair at the back of the head.
STEP 3 – Side of the head
• With the 9 mm or 12 mm guide comb attached, trim sideburns.
• Then change to the longer 25mm guide comb and continue to cut to the top of the
head.
STEP 4 – Top of the head
• Attach the 25mm or 30mm guide comb, cut the hair on top of the head against the
direction in which the hair normally grows.
• For longer hair on top, use scissors. Lift the hair on top of the head with styling comb.
Cut over the styling comb with the hair lifted or hold the hair between the fingers to lift
it and cut it to the desired length.
• Always work from the back of the head.
STEP 5 – The finishing touches
• Use the clipper without an attachment comb for close trimming around the base and
sides of the neck.
• To produce a clean straight line at the sideburns, reverse the hair clipper. Place the
reversed clipper at right angles to the head, tips of the blades lightly touching the skin
and then work downwards.
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
NO
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
SR
UA
BG
AE