![background image](http://html.mh-extra.com/html/remington/hc4110/hc4110_manual_1437844004.webp)
4
PARTS
1. On/off switch
2. Charging indicator light
3. Charging stand
4. Blade set
5. Short length selection lever (rear)
Not shown:
• Guide combs (x8)
• Storage case
• Barbers cape
• Sectioning clips (x4)
• Scissors
• Neck brush
• Styling comb
• Cleaning brush
• Oil
• Adapter
GETTING STARTED
CHARGING YOUR APPLIANCE
• Before using your hairclipper for the first time, charge for 24 hours.
• Ensure the product is switched off.
• You can charge your hair clipper in or out of the charging stand. Either plug the adaptor
connection directly into the bottom of the hair clipper, or by placing the hair clipper in
the stand and plugging the adaptor connection into the back of the stand.
• When charging, the charge indicator light will light up.
• If the product is not going to be used for an extended period of time (2 – 3 months),
unplug it from the mains and store.
• Fully recharge your hairclipper when you would like to use it again.
• Allow 16 hours for a complete charge.
• Note: To preserve the life of your batteries, let them run out every 6 months then fully
charge.
CHARGING VIA STANDARD ELECTRICAL SOCKET
• Ensure the product is switched off.
• Connect the charging adaptor to the product and then to the mains.
CORDED USE
• Connect the charging adaptor to the product then to the mains.
• When connected, the charge indicator light will light up.
CAUTION Extended mains only use will result in the reduction of the battery life.
CORDLESS USE
• When the product is switched on and fully charged it can be used in cordless mode for
up to 45 minutes.
ENGLISH