REMET CNC TECHNOLOGY SP. Z O.O.
Page 14 of 28
Producer of machinery and equipment, machining
Hydraulic system and feed control
1.
The connected hydraulic system is under high pressure and high tempera-
ture. Oil is irritating to the skin and released under high pressure can cause
serious injury. Special care should also be taken when searching for a po-
ssible leak.
2.
All activities related to connection / disconnection / tightening should be
performed when there is no pressure in the system.
3.
The nature of the hydraulic system is always dangerous for the operator.
Take special care during work with the device.
.
The rules of safe work performance
1.
Before starting work, make sure that the inlet and outlet funnels are empty.
2.
During work
and
immediately
after switching off, do not touch the di-
scharge channel, do not put your hands into the feeder inlet (the device, even
after switching off, still works for a short time).
3.
During work and immediately after switching off, do not touch the discharge
channel, do not put your hands into the feeder inlet (the device, even after
switching off, still works for a short time.
4.
Operators must provide sufficient space and hardened and no slippery sur-
face to work with the device. And work only in daylight or very good artificial
lighting.
5.
Operators must also ensure a good balance and stability. Do not lean for-
ward or stand above the device while the material is being thrown.
6.
When working, keep your head, hair and body away from the opening and
use protective goggles, hearing protection and protective clothing.
The size of the chips can be adjusted
using the feed roller feed regulator:
-
reducing flow; finer chips.
+
increase in flow; bigger woodchip.
