REMET CNC TECHNOLOGY SP. Z O.O.
Page 16 of 28
Producer of machinery and equipment, machining
5.
Periodically checks that all bolts and nuts are tight. Damaged replace.
6.
When replacing a damaged chipper knife, always tighten or loosen the knife
using protective gloves and following the instructions in section 9.
Rules of conduct in emergency situations posing threats to the life or
health of employees.
1.
After identifying the defects, damage or improper operation of the machine
or its subassemblies, chopper immediately shut down and immobilize and inform
the supervisor. Resuming work without removing damage or causing a breakdown
is not permitted.
2. If it is necessary to leave the chipper during unattended operation, switch
off the tractor and immobilize the machine.
3.
In case of doubts regarding the preservation of work safety conditions, the
employee has the right to stop work and ask the superior to explain the situation
and the decision.
4. In the event of an accident at work, switch off the tractor driving the ma-
chine, report the accident to the supervisor, call an ambulance if necessary. Leave
the workplace in the same state in which the accident occurred.
5. If there are doubts as to how to perform work, the work should be stopped
and the supervisor should be asked for guidance.
6. In case of fire of the tractor driving the chipper. Proceed accordingly with
instructions for fire-fighting.
7.
Insufficient or damaged or remaining chipper should be withdrawn from use,
and clearly marked with information boards and protected in a way that prevents
its launch.
