SPECIAL CLONING INSTRUCTIONS
It is possible to change Channel 0 values on the MASTER radio, hold
them in a temporary memory, and download them to the CLONE without
actually entering them into the permanent memory of the MASTER. This
is convenient if sequential identification numbers are used to identify a
series of portables in a radio system. Assuming that the frequencies,
Code Guard values, and other CH 0 values are common for all radios in
the system, but that the radio identification number should be unique to
each radio, the following method would be used to clone additional radios
for the system:
1
l
2 .
3 .
4
.
5 .
6 .
Program the MASTER with all
frequencies, Code Guard values and
Channel 0 values that will be
common to all radios.
Advance the display to show the
MASTER’s ID number (for example
100)
.
Press
CLR;
press
1,2,
and 5.125 is
now only in temporary memory.
Press *, connect the cloning cable to
the CLONE radio and download by
pressing
FCN.
ID number 125 is
now stored in permanent memory of
the CLONE.
After download, press
CLR.
Disconnect the CLONE. The
MASTER radio display will show
that
125
is still being held in the
temporary memory of the MASTER.
Press
PRI.
This will increment the
ID number one digit to
126.
NOTE:
Any new number can be
entered at this point by pressing
CLR
and using the digit keys to
enter the new number.
EPI 3101A User’s Manual
2 5
Summary of Contents for EPI 3101A
Page 1: ......
