6.
To keep the Password Code unchanged,
radio programming
press the
ENT
key and continue with normal
.
To change the Password Code, press the
FCN
key and enter a new six-digit password
code. The’digits are now displayed as you
enter them. The Password Code can
contain the digits 0 through 9, *, and #. The
* is represented as a
b
and the # is
represented as an
A
in the display.
IMPORTANT:
Do NOT use a 1 for the first digit
of the Password Code - the radio will
malfunction. It will then require using a
computer program to correct the Password
Code and put the radio back into normal
operating condition.
If you make an errorwhile entering the new
Password Code, press the
CLR
key and
try again.
7.
Press the
ENT
key to store the new
Password Code and proceed to the
programming mode. The display will
change to
PROG Ch 0.
The Radio is now
ready for Reviewing and/or Programming.
T O R E V I E W G E N E R A L R A D I O P E R F O R M A N C E V A R I A B L E S
( C H A N N E L 0 ) :
Channel 0 is the portion of the program that controls the general
performance variables for each Group of 14 channels in a 28-channel
radio. Thus, the Channel 0 settings for each Channel Group must be
reviewed or programmed separately.
NOTE:
Settings listed as Group One Functions and Group Two
Functions refer to reviewing or programming Function Groups,
not the two Channel Groups 01 and 02.
1 0
Summary of Contents for EPI 3101A
Page 1: ......
