E .
To Set the Scan Delay Time
After the Timeout Timer is set, the upper display will show
PROG
SCAN.
This is the duration of the Scan Delay Time in seconds.
Since the radio does not have a Scan
feature, no change is needed. Press
FCN
to advance to the next section.
NOTE:
It is highly recommended to leave
the Scan Delay Time at 0 seconds.
Miscellaneous Channel 0 Programming -GROUP ONE FUNCTIONS
After the Scan Delay Time is shown, the
display will show
PROG I- 12345.
This
is a group of five individual functions that
can be enabled or disabled.
NOTE:
See page 11 for Description and
Factory Settings information.
When a Function is enabled, the
corresponding number in the display will
flash. When the Function is disabled the
number is steady. If you wish to change
the Function from enable to disable, or
vice versa, press the number key
corresponding to that Function.
Once each Function 1-5 is set as desired,
press
ENT
to store them into memory
and automatically advance the program
to the next section.
If no changes have been entered, press
FCN
to advance to the next section.
GROUP ONE Functions
P R O G
I
1.
Battery Saver Inhibit - If needed,
press the
1
key to change the Battery
Saver’s status.
BATTERY SAVER ON
REMINDER:
If
1
is steady, the
Battery Saver Inhibit is disabled,
EPI 3101A User’s Manual
1 5
Summary of Contents for EPI 3101A
Page 1: ......
