Reliable Velocity V50, Instruction Manual, Page: 10 / 35

OPERATION
Plug the iron into the main outlet. The operation/temperature LED (5) will light
VQ#ZEFGBVMUJUXJMMCFTFMFDUFEBUUIFMPXFTUUFNQFSBUVSFSBOHF t5IF-&%XJMM
CMJOLVOUJMUIFTFMFDUFEUFNQFSBUVSFMFWFMIBTCFFOSFBDIFE mH"5BLFUIF
iron by the handle and pass the sole over the garment to be ironed.
TEMPERATURE SELECTION
The V50 has 4 temperature settings, which can be selected by pressing the
temperature selector (3).
Press the temperature selector (3) as many times as required until the desired
UFNQFSBUVSFMFWFMJTSFBDIFE mH1PTJUJPO t mH"1PTJUJPO tt mH#
1PTJUJPO ttt mH$1PTJUJPO ."9 mH%
The operation/temperature LED (5) will blink until the selected temperature
level has been reached. Once the temperature has been reached the LED will
stop blinking.
'SPNUIF."9UFNQFSBUVSFQPTJUJPOJGQSFTTFEPODFBHBJOUIF7XJMMSFUVSOUP
UFNQFSBUVSFQPTJUJPO t
STEAM SELECTION
Once the operation/temperature LED (5) stops blinking indicating that the selected
temperature has been reached:
t 'PSBTUFBNKFUQSFTTPOFPGUIFUXPTUFBNCVUUPOT POFJUIFSTJEFPGUIF
handle (fig.3).
/05&8IFOSFEVDJOHUIFUFNQFSBUVSFFHGSPNQPTJUJPO ."9 mH%UP
QPTJUJPO t mH"UIFVTFSDBOHFUBTUFBNKFUFWFOJGUIFQPTJUJPO
t mH"-&%JTTUJMMCMJOLJOHBOEFWFOJGUIFTFMFDUFEUFNQFSBUVSFIBTOPU
been reached.
t 5IF7JTFSHPOPNJDBMMZEFTJHOFEGPSCPUISJHIUIBOEFEBOEMFGUIBOEFE
people. One merely has to press one of the two silicone buttons.
t 5PTUPQUIFTUFBNQSFTTPOFPGUIFUXPTUFBNCVUUPOTPOFNPSFUJNF5IF
steam will now stop until one of the two buttons is pressed again.
AUTOMATIC SHUT OFF
The Velocity V50 has an automatic shut-off system. It is shut-off automatically
eight minutes after the last time it was used. This means that once the shut-
off device is activated, it ceases to heat and begins to cool down. To wake it up
again, press the temperature button (3) for at least one second.
The auto-shut off mode can be manually selected by pressing the temperature
button for three seconds, and wake it up again by pushing the same button for
more than one second.
06