START TO MASSAGE
Press the button
on the handheld remote controller, you can see the
communication testing interface and the testing function start, if the handheld
remote controller communicate well with the controller of the massage bed, and the
handheld remote controller will display the test was successful and change to
massage interface (and the default model is automatic 1;Vibration massage on ,with
2 levels), or else display the test was failed and presents the message
Standby
Connected
Communication Test
OK
Communication
Testing...
connection testing
Communication Test
Communication
Testing...
Unconnected
Communication Test
Communication
Testing...
ERROR
Warning
Communication
ERROR
Please check if
the main power
is turned on or
not.
THE ADJUSTMENT OF THE ANGLE BETWEEN BACKREST AND CALF-REST OF BED BASE
1) Adjust the degree of the backrest
Back up button: press this button when turn on the power, the back will up
gradually, with dripping sound at the same time. (During two minutes this button
not touched or mattress go to the top position, the power will be off automatically.).
Press this button again to stop it.
Back down button: press this button when turn on the power, the back will drop
gradually, with dripping sound at the same time. (If it was no reaction within two
minutes, then you can press this button again to turn it off). Press this button
again to stop it.
Name Button Massage Content
Massage Features
Display
M
a
s
s
a
g
e
m
o
d
e
l
Auto 1
Auto 2
Auto 3
AIR MODE
Auto
AUTO
AUTO
AUTO
AIR MODE
Auto
AIR MODE
Auto
AIR MODE
AIR MODE
AIR MODE
AUTO
Auto 4
Auto
START TO MASSAGE
AUTO
WAIST
STRETCH
Waist
Stretch
Auto 5
Auto
1. Plug in the machine
instruction manual
Step1
Step2
Step3
Figure : Connecting the power
configuration of the mattress
Attention
1.Connecting the power, two sides of power line docking port should arrow
aligned, slight enforce, or hard plug will damage the inside needle.
2.Be sure not to switch adaptor power unless you finish all the steps above,
otherwise you will cause damage to the machine
2.Massage
Massage focus on whole body air pressure, loosens
the limbs (Advice lay on bed and flat on back
massage)
This model is to remove the neck massage function
in Auto 1. (Advice lay on bed and flat on back
Massage focus on neck and shoulder, buttock,
improve the fatigue symptoms. (Advice lay on bed)
This model is to remove the neck massage function
in Auto 3. (Advice lay on bed and flat on back
massage)
Massage focus on belly, promote the gastrointestinal
function. (Advice lying face up on a bed)
Massage focus on push waist to alleviate the pain
on the waist.(Advice lay on bed and flat on back
massage)
Waist
Stretch
vibration
switch
Switch on, foot Vibration massage.
Vibration
intensity
With 3 levels adjustable
Vibration
massage
V
ib
ra
tio
n
m
o
d
e
l
Figure : Connecting the
power of the mattress
The card
slotretainingring
Aimed at the
card slot point
After docking, the retaining ring must
be across thecard slot point
making a sound
then fixed interface.
