THERMOJET
®
G3000E SERIES
OIL PURIFIER SYSTEM
INSTALLATION AND OPERATING MANUAL
Doc #
77740122
Rev
14
Date
JUNE 2020
Page
72
of
104
Cleaning and Decontamination
Oil spills may be wiped up using paper, cloth or other absorbent media. Clean reservoir and cabinet surfaces
with mild soap and water. If degreasing agents or solvents are used to clean oil spills, follow the label
instructions of the cleaning agent. The ThermoJet Oil Purifier cabinet and reservoir are constructed from T-
304 stainless steel.
Use inspecting and cleaning reservoir interiors use only lint free rags for cleaning and wiping them out.
The outside and interior of the ThermoJet Oil Purifier cabinet and reservoir may be wiped down with cloth
rags or recyclable paper wipes or towels that are able to absorb oil and remove any accumulation of dust.
In case of oil spillage, the user or other
responsible body must ensure appropriate
cleanup and decontamination is carried out.
Ensure that decontamination or cleaning agents
used do not cause a hazard as a result of a
reaction with parts of the equipment. Cleaning
solvents should not contact gaskets or plastic
components
Consult with your lubricating oil supplier and the
lubricating oil MSDS documentation to ensure that
decontamination and cleaning agents do not react
with the lubricating oil used
.
USE DAMP CLOTH ONLY TO CLEAN PLASTIC
COMPONENTS. USING A DRY CLOTH TO CLEAN
PLASTICS CAN GENERATE A STATIC
DISCHARGE AND CREATE AN EXPLOSION
HAZARD.
WARNING
