THERMOJET
®
G3000E SERIES
OIL PURIFIER SYSTEM
INSTALLATION AND OPERATING MANUAL
Doc #
77740122
Rev
14
Date
JUNE 2020
Page
64
of
104
Check and Adjust Operating Pressures
The ThermoJet Oil Purifier must be running and operating normally in order to perform this maintenance task.
Checking and adjusting operating supply and return oil pressure is for the purpose of insuring that the
systems operating pressures are correctly adjusted.
For information on adjusting the inlet oil pressure refer to the section titled
Adjusting System Pressure
in the V
SYSTEM START-UP AND OPERATION section of this manual
For information on adjusting the inlet oil pressure refer to the section titled
System Discharge Pressure
in the
V SYSTEM START-UP AND OPERATION section of this manual
NOTICE:
Wear appropriate personal protective gear.
Surfaces are HOT
WARNING
