12
Further notes see chapter 7 „Maintenance“.
4.3
Investment (manufacturer’s recommendation)
•
The diameters of the channels to the supplier should be 4,5 – 5 mm, the short sprueings to
the object should be 2,5 –3 mm.
•
Muffle surface and floor space must be rough and at the same time be grinded according
to corresponding muffle size (we recommend to use a Velcro disc at the trimmer. Diamond
discs tend to be easily damaged by the muffle ring and some investment compounds).
•
Caution: Don’t use any wax softening agents
•
Wall thickness:
non-precious metal/precious metal crowns and dental bridges
Minimum 0,3 – 0,5 mm
model casting Minimum 0,5 mm
generally for precious metals Minimum 0,3 mm possible
4.4
The display panel of your INDURET- COMPACT
A) Key Function:
01 – Key P
Entry confirmation and changing the temperature when programming
02 - Key down
Reduce values or select
03 – Key up
Increase values or select
04 – key U
(This key is without any function if your controller only has one
memory cell)
In order to obtain further dental sprueing information pls. read the delivered instructions.
„The right way“.
