REITEL DUSTY COMFORT, Operating Instructions Manual

Page: 10 / 20

10
Troubleshooting
Device cannot be switched on (motor
doesn’t start). a.
Check the building’s fuse.
b. Overload protection switch has tripped
(switch off the suction unit and allow it
to cool for approx. 5 minutes).
Low suction capacity. a. Clogged suction hose or nozzle
→ clean
suction hose/nozzle.
b. Seal between tank and upper section of
vacuum cleaner is dirty
→ clean gasket.
c. Full filter bag
→ replace it.
d. Fine dust filter element is dirty
→ clean
it.
Maintenance
•
Regularly check the device’s state. Pay attention to visible damage to housing or power
cord.
•
Regularly replace the filter bag (see chapter 4.2 Replacing filter bag or fine dust filter
element).
•
Regularly clean or replace the fine dust filter element (see chapter 4.2 replacement of
filter bag or fined dust filter element).
•
Regularly empty and clean the dirt tank (see chapter 4.4), especially if the suction unit
has not been used for some time.
•
After picking-up liquids: store the upper section of the suction unit separately so that the
filter element can dry.
•
Regularly clean the housing with a damp cloth.