Removal
TARAtec 9/10
25 / 44
6
Removal
Removal of the sensor can lead to an incorrect measured value at
the input to the measuring and control device, which can cause the
control circuit to apply uncontrolled dosing.
Before removing the sensor:
Switch off the measurement and control system or switch it over to
manual operation.
Close the inlet of the water being measured.
Close the outlet of the water being measured.
Remove the electrical connection.
To disconnect a sensor with a 2-pole screwed terminal block:
Undo the cable gland.
The cable is now free to move.
Unscrew the hood with the cable gland from the sensor.
Release the cable cores from the terminals.
Undo the screw fastening and carefully pull the sensor out.
