Technical
data
TARAtec 9/10
39 / 44
9
Technical data
Information on the technical data can be found at the following Internet
address:
http://www.reiss-gmbh.com/english/datasheets.htm
10
Deinstallation and storage
To deinstall a sensor and prepare it for storage, proceed as follows:
Unscrew the membrane cap.
Using tweezers, remove the G-holder from the membrane cap.
Rinse out the G-holder with mains water.
Use mains water to rinse the electrolyte out of the membrane cap.
Shake the sensor body dry several times (see Fig. 12, p. 25).
Rinse the electrode finger with mains water.
Dry the membrane cap, G-holder and sensor body in a dust-free
place.
For protection, loosely screw the dry membrane cap onto the sensor
body.
Make sure that the membrane is not lying in contact with the working
electrode.
Store G-holder in original packaging.
If the membrane cap has been in use for one day or longer we
recommend that it is not used when the sensor is recommissioned.
Perform a change of membrane cap (see section 7.2, p. 26).
11
Disposal
Comply with the local regulations on disposal.
