Programming
4. Step:
a. “Location and Depth”
Enter the desired location of the selected step in degrees and enter the depth at which the pivot
should run during the selected step.
b. “Step drop down”
Select the step from the drop down menu. If more steps are required use the ADD button to add up
to 25 steps per program. Buttons below drop down menu work the same as the sector buttons.
c. “Step Program drop down”
Select the program number from the drop down menu. Up to three programs can be saved, but only
one program can be ran at a time.
d. “At Location”
Enter the amount of Delay, if any, when the pivot hits the location for the selected step in days,
hours and minutes.
e. “Action drop down”
Choose and action for when the system reaches the location for the selected step.
f. “Function popup”
Choose and function for when the system reaches the location for the selected step, from the popup
menu.
g. “Pie Chart”
Each programmed step will be shown as a red line.
a.
b.
c.
c.
d.
e.
f.
Touch
Screen
User
'
s
Manual
27
WITH TOUCH TECHNOLOGY
WITH TOUCH TECHNOLOGY
