manualshive.com logo in svg

Reinhardt 1002-349-807, Manual

Share
Download
Reinhardt 1002-349-807 Manual Download Page 20

REINHARDT 

System- und Messelectronic GmbH

Bergstr. 33 86911 Diessen-Obermühlhausen Postfach 12 41 D-86908 Diessen Tel. 08196/7001

PM BD MWS6 E Page 19 of 34

erstellt am 02.11.2000

Manual MWS 6

Additional Sensor
Sensors of any kind can be integrated as additional sensors. The information signal
must be applied as voltage in the range between 0 V and + 4 V or it has to be adapted
to MWS 6 by a special amplifier. Negative or higher voltages are blocked, but out of
security reasons, should be avoided in any case!

The sensor signals are linearised by software.
See Adjustment of an additional sensor (P.28).

Additional sensors can be voltage supplied by the weather station as long as its
current consumption is below 25 mA.
If current consumption exceeds this value, we cannot grant that MWS 6
weather station works properly !!!
If they need higher currents, the sensors must have an external power supply and
its ground has to be connected to the MWS 6-ground (Pin 1 of the connector socket).
You can call for adjustment instructions of the additional inputs at any time.

Additional Sensor

Note

Summary of Contents for 1002-349-807




































Reviews:

No comments

Brands by name

Popular brands

Load more brands