REINHARDT
System- und Messelectronic GmbH
Bergstr. 33 86911 Diessen-Obermühlhausen Postfach 12 41 D-86908 Diessen Tel. 08196/7001
PM BD MWS6 E Page 9 of 34
erstellt am 02.11.2000
Manual MWS 6
"Set Process Control" is another useful tool under menu item "Setup".
Dependent on measured values, you can start programs with this menu item or you
can turn on or off various devices, using a special software and a relay board. You can
use this e.g. for irrigation devices in greenhouses.
In order to do so, you link certain measured values to a special program as shown in
the menu above.
Every 10 seconds, the selected limit values are determined. The linked program is
also called up every 10 seconds when the limit values are exceeded or fall below the
set value. In case you do not want a program call every 10 seconds, you enter the limit
value with parameter/E. Then the linked program will only be called once when the
limit value is exceeded or falls below the set value.
Under menu item "Auto" you can create an automatic slide show of various
measuring windows, display of text you have entered yourself and even a display of
pictures with 16 colours (The DOS-version requires PCX and the Windows-version
BMP-files).
This automatic slide show is controlled with a text file, where you can set a special
sequence and period that the pictures are on screen. (MWS_AUTO.DAT)
For more detailed information see the online Help ("?" in the menu bar or use the F1-
key).
Set Process Control
Automatic Slide Show