Reiner jetStamp 1025 Operating Manual Download

Page: 75 / 83

Recognising and Removing Interferences

© ERNST REINER GmbH & Co. KG

Originalanleitung

7.4

Correctable error messages

Message

Eliminate message by

Remark

Print cartridge empty

Inserting a new print cartridge.

The print cartridge is empty
and must be replaced.

Wrong print cartridge

Inserting a new REINER print
cartridge

The inserted print cartridge
is not a REINER print
cartridge.

Rechargeable battery empty

Connect the device to the supply
voltage.

Battery is empty and must
be charged.

Rechargeable battery
defective

Inserting new rechargeable batteries

The batteries are defective.

Please reinsert micro SD
card (micro SD card
read/write error)

Insert the micro SD card again

Please reinsert micro SD
card (micro SD card access
error)

Insert the micro SD card again

Print image not released
(password), or invalid print
image.

Change device password or delete
print images on the micro SD card.

Please delete invalid print
image on micro SD card

Delete the print image on the micro
SD card.

Please reinsert micro SD
card (micro SD card
mounting error)

Insert the micro SD card again

Please insert micro SD card
(micro SD card not available)

Insert the micro SD card

Device locked

The device must be unlocked by
entering a password via the PCset
graphic or the device menu.

7.5

Device error messages

Message

Eliminate message by

Device error xx

Switch the device off and on

Summary of Contents for jetStamp 1025




















































































Search results

Summary of Contents for jetStamp 1025

Reviews:

Related manuals for jetStamp 1025

Brands by name

Popular brands

Reiner jetStamp 1025, Operating Manual

Search results

Summary of Contents for jetStamp 1025

Reviews:

Related manuals for jetStamp 1025

Brands by name

Popular brands