Maintenance
67
© ERNST REINER GmbH & Co. KG
Originalanleitung
Place the device on a firm surface.
Press function button for print cartridge
.
Print carriage
moves to the right into the change position.
Open flap for battery and print cartridge compartment
.
Push the print cartridge locking
slightly upwards and open it.
Remove the old print cartridge
from of the device.
Unpack the new print cartridge
and remove the clip.
Hold print cartridge locking
Insert the new print cartridge
as shown in the figure
.
Make sure it slides all the way down.
Close the print cartridge locking
.
Close flap for battery and print cartridge compartment
.
Remove the old seal
from the device,lifting the retaining clip of the seal
upwards.
Remove the seal tip
from the notch.
First insert the new seal
with the seal tip
into the notch.
Press the seal
slightly down until it snaps into the holder.
Press function button for print cartridge
.
The print carriage
returns to the basic position.
The change position can also be selected via the display menu.
In the basic position, drying of the ink is prevented (refer to "
").
