9
Printing
Model 780 - 785: Setting of the depth stop with contact switch
Place the device on its left side
Turn the red wheel (10) in
the direction of the arrow
to
position 1
(see figure)
Press down the yellow
slide (9) and move it to
the desired value on
the scale (11).
(scale value = distance
from the top edge of the
paper to the centre of
the imprint in mm).
Release the yellow slide (9)
Set the desired trigger mode
The printing process can only be triggered when no numerals or words
are flashing in the display. If necessary, press
[ time ]
or
[ n/r ]
to stop the display from flashing. The printing process can be triggered
in various ways, selected by the trigger mode switch (3).
Take off the front cover and set the trigger mode switch to the desired
trigger mode by pushing it up or down.
Description of the different trigger modes:
1 = Printing
only
by pressing down the feedplate
2 = Printing
only
by depth stop with contact switch
3 = Printing by depth stop with contact switch
and
pressing down the feedplate
4 = Printing by depth stop with contact switch
or
by pressing down the feedplate
10
9
11
3
