20
The Numberer enables the ongoing numbering of imprints into
corresponding fields, indicated as
num
at the different,
stored stamp pictures (see page 13 ... 17).
The device disposes of dual numberer:
Numberer 1
6 or 8 characters (depending on set stamp picture)
will be used for the stored, device internal stamp pictures
Numberer 2
(1 ... 8 characters ) is used exclusive in Mod. 785 + 787
for special stamp pictures, stored on the chip card.
The
numbering field
can include following settings:
• Setting of the starting number
(Setting see page 21,
AUT nr 1
respectively
AUT nr 2
)
• Setting of repetition (rep)
enables the stamping of a constant
number with the set repetition factor (0 ... 99) . This is displayed
at the left (excepting the stamp pictures 11 ... 13)
• Incremental printing
of an adjustable minimal value up to a
maximal value (setting see page 23,
Mode n1
/
n2
)
• Decreasing printing
of an adjustable maximal value to an
adjustable minimal value (setting see page 23,
Mode n1
/
n2
)
• Skip
of numberer (adjustable 0 ... 99 )
(setting see page 23 / 24,
Skip n1
and
Skip n2
)
• Minimal value of numberer
stored by pressing
[ fkt ]
and
[ set ]
. Symbol appears behind
AUT nr 1
or
AUT nr 2
.
Repeated pressing the keys shows the stored value.
• Maximal value of numberer
stored by pressing
[ fkt ]
and
[ mode ]
. Symbol appears behind
AUT nr 1
or
AUT nr 2
.
Repeated pressing the key shows the stored value.
• Reset stored values of numberer
(min. and max.)
Reset will be executed by pressing keys
[ fkt ]
and
[ n/r ]
.
The symbols and disappear.
Functional description of the Numberer (num)
i
Note
