19
PORTA
GANTRY
500-3000
Ratchet Beam Elevation System
Option
(Two person operation recommended – one on
each A-Frame)
Always wear gloves when using this item.
Ensure the hook at the end of ratchet strap is
positively engaged within the bottom hole of
the A-Frame upright
Remove lower bolt on trap plate
Tension ratchet strap to take the upright/beam
weight
Remove upper bolt on trap plate
Operate ratchet to adjust height to required
setting, ensuring that the bolt holes are aligned
as in figure 3
Re-insert upper bolt and nut/washer assembly
Ease tensioned strap aside, re-insert lower bolt
and secure.
Repeat steps 2-8 on the second A-Frame,
ensuring that the gantry uprights are vertical,
and the beam is horizontal
Check all bolts on the gantry are sufficiently
secure by ensuring all spring washers are fully
depressed
Easy Conversion to Winched
Configuration
A Winch Kit and accessories can be supplied to
convert the System into a winch capable system.
Please contact your REID Representative for
further details and requirements.
Customised Configurations
For customised systems additional assembly
and operation information may be provided as
required.
Operate Ratchet
Ratchet in ‘parked’ position
Fig 3
Fig 4
