34
11625-101-Rev. L
Cleaning & Maintenance
(continued)
Lens Replacement
(continued)
Changing Cross Cylinder Lens Assembly
The cross cylinder is changed as a complete assembly.
Follow the procedure below and refer to Figures MM-1,
and MM-2.
1. Using a 0.060-6 Spline Screwdriver, remove the two
spline screws.
2. Lift off the retaining ring.
3. Lift out the complete Cross Cylinder Lens Assembly.
4. Reverse the procedure to install a new cross cylin-
der.
Note:
Assembly is symmetrical so either side can
face outward.
Figure MM-1 Cross Cylinder Lens Assembly
Figure MM-2 Cross Cylinder Lens Assembly Close Up
Retaining
Spline Screws
Cross Cylinder
Lens Assembly
