4 I English
3717
Karl M. Reich Verbindungstechnik GmbH
REICH ®
1
TECHnICAL DATA
Type
3717
Dimensions mm
185/240
Weight kg (without fasteners)
0,98 kg
single sequential
Recommended operating pressure
range
4 - 7 bar/
0,4 - 0,7 MPa
Maximun permissible operating
pressure
7 bar / 0,7 MPa
Air consumption per driving
operation
0,16 l at 6 bar /
0,6 MPa
Magazine capacity.
no. of fasteners
150
Penetration depth setting
no
Fasteners: pin and brad nails(Micro Brads)
Pin nail/nail length mm
12-30
Wire thickness mm
0,80
Recommended lubricant
1 litre special oil. Code no.
9 4420
250 cm3 grasa especial. Code no.
68 3868
2 nOIsE/VIbRATIOn InFORMATIOn
Noise characteristic values *
3717
A-weighted single-event emission
sound pressure level at work
station L pA, 1s
85 dB(A)
A-weighted sound power level
L WA, 1s, d
92 dB(A)
Vibration characteristic values**
Weighted r.m.s.-acceleration (a)
< 3,2 m/s2
The noise level when working can exceed 85
db (A).
Wear ear protection!
* Measured values determined according to
En 12549:1999.
** Measured values determined according to
IsO 8662-11:1999
3
suPPLIED WITH
1 Micro-brad nailer
1 safety instructions
1 Technical data sheet
1 Transport case
4
fIllInG The MaGaZIne
Only those fasteners specified under technical data
(see 1) may be used.
When filling the magazine, hold the tool so that the
muzzle is not pointing towards own body or towards
any other person.
Do not load the tool with fasteners with the safety
yoke or trigger depressed.
Place the tool on its side. Press the locking lever (l)
and pull the magazine rail (m) back. Introduce the brad
nails or pins tip downwards and push the magazine
rail forward until it locks into place.
5
ACTuATIOn DEVICE
The brad nailer is equipped with single trigger release
and has a release catch on the trigger. To trigger a
driving process, the release catch (u) which is located
behind the trigger has to be actuated first.
6
ACCEssORIEs
Code No.
balancer for 10 - 20 n (1.0 - 2.0 kp),
cable travel 1.6 m (5.2 ft).
40 3393
