4 I English
3716
Karl M. Reich Verbindungstechnik GmbH
REICH ®
1
TECHnICAL DATA
Type
3716
Dimensions mm
220/190
Weight kg
(without fasteners)
0,9 kg
single sequential actuation
Recommended operating pressure
range
4 - 7 bar/0,4 -
0,8 MPa
Maximun permissible operating
pressure
7,5 bar / 0,75
MPa
Air consumption per driving
operation
0,4 l at 6
bar / 0,6 MPa
Magazine capacity.
no. of fasteners
230
Penetration depth setting
no
Fasteners: pin nails
Pin nail length mm
12-30
nail shank Ø mm
0,65
Recommended lubricant
1 litre special oil. Code no.
9 4420
250 cm3 grasa especial. Code no.
68 3868
2 nOIsE/VIbRATIOn InFORMATIOn
Noise characteristic values
*
3716
A-weighted single-event emission
sound pressure level at work
station L pA, 1s
76 dB(A)
A-weighted sound power level
L WA, 1s, d
88 dB(A)
Vibration characteristic values **
Weighted r.m.s.-acceleration (a),
a h, w, 3s
1,6 m/s2
The noise level when working can exceed 85 db (A).
Wear ear protection!
* Measured values determined according to
En 12549:1999.
** Measured values determined according to
IsO 8662-11:1999.
3
suPPLIED WITH
1 Pin nailer
1 Tool use and safety instructions
1 Technical data sheet
4
FILLInG THE MAGAZInE
Only those fasteners specified under technical data
(see 1) may be used.
When filling the magazine, hold the tool so that the
muzzle is not pointing towards own body or towards
any other person.
Do not load the tool with fasteners with the safety
yoke or trigger depressed.
Place the tool on its side. Press the locking lever (l) and
pull the magazine rail (m) back. Introduce the nails tip
downwards and push the magazine rail forward until
it locks into place.
5
ACCEssORIEs
Code No.
balancer for 10-20 n (1.0-2.0 kp),
cable travel 1.6 m
40 3393
