4 I English
3482...1
Karl M. Reich Verbindungstechnik GmbH
REICH ®
1
TECHnICAL DATA
Type
3482...1
Dimensions mm
160/210
Weight kg (without fasteners)
0.85 kg
single sequential
Recommended operating pressure
range
4 - 7 bar/
0.4 - 0.7 MPa
Maximun permissible operating
pressure
7 bar / 0.7 MPa
Air consumption per driving
operation
0.34 l at 7 bar /
0.7 MPa
Magazine capacity.
no. of fasteners
120
Penetration depth setting
no
Fasteners: Staples K
staple length mm
6-16
Wire thickness mm
0.65 x 0.95
staple width mm
12.85
Recommended lubricant
1 litre special oil. Code no.
9 4420
250 cm3 grasa especial. Code no.
68 3868
2 nOIsE/VIbRATIOn InFORMATIOn
Noise characteristic values
*
3482...1
A-weighted single-event emission
sound pressure level at work
station L pA, 1s
77.3 dB(A)
A-weighted sound power level
L WA, 1s, d
90.
3 dB(A)
Vibration characteristic values**
Weighted r.m.s.-acceleration (a),
a h, w, 3s
1.93 m/s2
The noise level when working can exceed 85
db (A).
Wear ear protection!
* Measured values determined according to
En 12549:1999.
** Measured values determined according to
IsO 8662-11:1999
3
suPPLIED WITH
1 stapler
1 Tool use and safety instructions
1 Technical data sheet
1 Transport case
4
FILLInG THE MAGAZInE
Only those fasteners specified under technical data
(see 1) may be used.
When filling the magazine, hold the tool so that the
muzzle is not pointing towards own body or towards
any other person.
Do not load the tool with fasteners with the safety
yoke or trigger depressed.
Turn the fastener with the magazine upside down.
Press the locking lever (l) and pull the magazine (m)
back. Introduce the staples and slide the rail forward
rail until it locks.
5
ACCEssORIEs
Code No.
balancer for 10 - 20 n (1.0 - 2.0 kp),
cable travel 1.6 m (5.2 ft).
40 3393
