
DETAILED CPM-700 PROCEDURE
23
REI
CPM-700
7.
Hold the Broad Band
Microwave Probe in your hand
at the base of the probe (as
shown in the picture).
8.
Use the probe directionally,
oriented both horizontally and
vertically, as well as near all surfaces and objects that could
contain a hidden surveillance device while watching the bar graph
display. The bar graph display will move up and down the scale
as the unit senses various RF levels.
9.
As described earlier in the PERFORMING A “WALK AROUND
ROOM SWEEP” section on page 16, locate the highest RF level in
the room. You will notice as you get close to a source of RF
energy that the bar graph will continue to rise. Turn off, and back
on again, the lights and other equipment in the target area and
watch for noticeable changes in the bar graph display (fluorescent
lights and other devices may produce strong RF interference and
create “false positive” indications).