22
OPERATING AND MAINTENANCE MANUAL
Chapter 9 - Operation and maintenance
TAE K15÷K20
The data in this manual are not binding and may be changed by the manufacturer without notice.
Reproduction of this manual, even partial, is strictly prohibited.
C
HAPTER
9
O
PERATION
AND
MAINTENANCE
9 . 1
O p e r a t i o n
The machine operates in completely automatic mode.
There is not necessary to turn it off when there is no thermal load as it turns off automatically when the preset water outlet temperature has been
reached.
9 . 2
M a i n t e n a n c e
ATTENTION
Before proceeding with the installation or the maintenance of these units be sure that all personnel concerned have read and understood the
Chapter 2
“Safety“
.
9 . 3
U n i t a c c e s s
ATTENTION
Everytime the panels must be removed the unit must be switched off and disconnected from power supply.
The access to the evaporator and to the components of the hydraulic circuit can be carried out by unscrewing, by a screwdriver, the screws fixing
the panel (A).
To access the components of the electrical circuit remove the panels (B-C).