- 8 -
curled
Loosen the belt appropriately. Note: If
the supporting axle of the instrument
that has the shield ring for the belt
deviated slightly, it does not affect the
operation of the instrument.
6.
The
counter
counts wrongly or
there
are
iron
materials that are
undetected
a) The object to be detected
is lower than 15mm and
cannot hamper the infrared
beam.
a)
Purchase special size photoelectric
devices from our Company;
b)
Detect several objects at the same
time so as to hamper the infrared
beam completely. However, at this
time, the counter cannot count
numbers correctly.
b) The object to be detected
is too narrow and can
hamper the infrared beam.
The same as above
c) The object to be detected
is translucent or there is
space to cause the leak of
infrared beam.
Switch the button of “LIGHT” to
“OFF” on the electric panel.
d) The photoemission device
is not directed at the receptor
Adjust the direction.
e) The photo-electricity is
injured.
Change a new one
7.
Other
malfunctions
that
cannot be resolved.
Use the instrument in accordance to the
Operating Manual.
Contact the Company.
Note:
The attached part for detection is the one that is under the standard testing. Its sensitiveness
differs in accordance to the difference of merchants to be detected, their size and circumstances. If
it is used under non-standard circumstance, it might happen that the iron fragment might not be
detected. The Company will not bear any legal liability if it causes any loss because it is used
under such circumstance (non-standard circumstance).
If the norms and the types differ from that of described in the Operating Manual in the
production development of the Company, the company will not issue any other announcement.
The aim of the Company: Seeking development based on reliable quality, welcoming customers
with attentive and satisfactory service Warmly welcome all the old and new customers nationwide
as well as those from abroad to place orders and make purchases.
Product Name: :
Needle Detector Machine
Model No.:
LX-630A
Guarantee Period: One year (After sale service lasts for one year if the instrument is in normal
operation. However, the conveyer belt and man-made fault are not included.)
