REHM TIGER 180 AC/DC ULTRA, Operating Instructions Manual

Page: 8 / 68

Introduction
8
Welding power sources may not be used to defrost pipes.
Intended use also includes compliance with the prescribed assembly,
disassembly and reassembly, commissioning, use, maintenance and disposal
measures. Please make particular note of the information in Section 2 Safety
information and Section 8.4 Proper disposal.
The system may only be operated under the aforementioned conditions. Any
other use is considered unintended use. The consequences of unintended use
rests with the operator.
1.3 Symbols used

Enumerations proceeded by a bullet point: General enumerations

Enumerations proceeded by a square: Work or maintenance steps that must
be performed in the order listed.

Section 2.2, Warning symbols on the system
Cross-reference: Here to Section 2.2 Warning symbols on the system ,
warning symbols on the system
Bold text is used for emphasis
Note!
... indicates practical tips and other particularly useful information.
The safety symbols used in this manual:

Section 2.1
Typographic
distinctions
Safety
symbols