REHM TIGER 180 AC/DC ULTRA, Operating Instructions Manual

Page: 30 / 68

Function description
30
Fig.11: Welding current process with the dual-wave method
4.11 Load and save programs
Loading and saving of 100 programs is performed using the push buttons Load
[14] for loading and the Save [13] for saving. The programs can be stored and
loaded under an arbitrary number. In this process the values for all adjustment
options offered by the machine are saved or loaded for each program.
Therefore, once the unit settings are determined for recurring welding tasks they
can be recalled at the welding units in seconds. This saves time and ensures
consistent quality.
The individual welding unit base settings such as the start and end crater current,
ignition energy, etc., for use by multiple people can be saved for each person
and quickly duplicated.
One special feature of the TIGER welding system is the rapid loading and storing
of 2 programs, P1 [6] and P2 [7].
4.11.1 Fast setting P1 and P2 (Quick choice buttons)
The push buttons P1 [6] and P2 [7] enable the user to quickly load and save
programs.
To load program 1 or program 2 briefly press button P1 [6] or button P2 [7]. The
push button selected illuminates.
To save the machine settings performed press and hold push button P1 [6] or
push button P2 [7] for approximately 2 seconds. When the values are saved the
digital display [5] disappears for approximately 0.5 seconds. The selected push
button illuminates, the program is now saved under this push button.
With the up/down torch program 1 or program 2 can be called up (see Section
4.14 Special parameters).
_ _
+