8
Safety
Authorised persons
WARNING!
In case of improper operation and maintenance of the welding machine, dangers arise for
people, objects and the environment.
Only authorised persons may work with the welding machine!
Authorised persons for operation and maintenance are the instructed and trained specialists of the operator and
the manufacturer.
The owner must
train the staff,
instruct the personnel at regular intervals (at least once a year) on
- all safety regulations concerning the welding equipment,
- operation,
- the recognised rules of technology,
check the level of knowledge of the personnel,
document the training/instructions,
the participation in the trainings/instructions,
check that the personnel work in a safety-conscious manner and observe the operating instructions.
The operator must
have completed training on the use of the welding equipment,
know the function and mode of operation,
before putting the device into operation
- have read and understood the operating instructions,
- be familiar with all safety devices and regulations.
1.6
General safety instructions
Only put the device into operation under the following conditions:
The technical condition of the device is flawless.
The device is used for its intended purpose.
The operating instructions are observed.
All safety devices are present and active.
Eliminate malfunctions or let them be elimiated immediately. In case of malfunctions, stop the unit immediately
and secure it against unintentional or unauthorised switching on.
PLEASE OBSERVE THE FOLLOWING:
Observe the accident prevention regulations of the trade association responsible for your
company or other supervisory authorities!
Check the cutting device for externally visible damage and defects before putting it into
operation. Defects and damage must be repaired immediately.
Protect the plasma cutter from moisture.
Never use the plasma cutter in environment
- containing unknown substances.
- with a risk of explosion or fire.
- with poor ventilation.
- which are wet or damp.
Never work under the influence of diseases that impair concentration, overtiredness, drugs, alcohol or
medication.
Keep the air inlet and outlet openings clear.
Do not use aggressive cleaning agents to clean the unit.
Repairs may only be carried out by qualified persons.
Only use original spare parts and accessories.
