32
Declaration of Conformity
11 EU Declaration of Conformity
For the following products
The manufacturer / distributor
REHM GmbH u. Co KG
Ottostraße 2
73066 Uhingen
Product group:
Plasma cutting device
Type designation:
Plasmaschneidgerät
Product designation:
BARRACUDA 45i
BARRACUDA 65i
BARRACUDA 105i
BARRACUDA 125i
is hereby confirmed to comply with the essential protection requirements laid down in Council Directive
2014/ 30/EU
(EMC Directive) on the approximation of the laws of the Member States relating to electromagnetic compatibility and
Directive
2014/35/EU
relating to electrical equipment designed for use within certain voltage limits.
The above mentioned products comply with the provisions of these directives and meet the safety requirements for
arc welding equipment according to the following product standards:
The following harmonized standards were applied:
EN 60 974-1:2012
Arc welding equipment - Part 1: Welding power sources
EN 60 974-10:2014
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements
According to EU Directive 2006/42/EC Article 1. Directive 2006/42/EC Article 1, the above products fall exclusively within the
scope of Directive 2014/35/EU concerning electrical equipment designed for use within certain voltage limits.
Name and address of the person authorised to compile the technical file:
Rolf Stumpp, REHM GmbH u. Co KG., Ottostraße 2, 73066 Uhingen
Rolf Stumpp (Geschäftsführer)
Uhingen, den
01
.0
8
.2022
