6
Safety
1.2 Intended
Use
The BARRACUDA 45i, 65i, 105i and 125i plasma cutters are suitable for arc cutting of steel, stainless steel,
aluminium and other conductor materials, using compressed air.
The plasma cutters are designed for professional use and may therefore only be used by qualified personnel, in
accordance with these operating instructions.
Part of the intended use is that you
Observe the operating instructions,
Comply with the inspection and maintenance instructions.
1.3
Reasonably foreseeable misuse
Use in areas with hazardous substances, explosion risk or fire hazard.
Use for heating objects or liquids.
Use for machining non-metallic products.
Use for igniting fuels.
WARNING!
This Class A welding equipment is not intended for use in residential establishments where power is
supplied by a public low-voltage power supply system. It may be difficult to ensure electro- magnetic
compatibility in these areas, due to both conducted and radiated disturbances.
If the plasma cutter is used in any way other than that described under "1.2 Intended use" or modified without
the permission of REHM GmbH u. Co. KG Schweißtechnik, the plasma cutter is no longer being used for its
intended purpose.
WARNING!
In case of improper use of the device
Danger arises for the personnel,
The device and other material assets of the operator are endangered,
The function of the device may be impaired.
We accept no liability for damage due to improper use.
Any use beyond the intended use or any other use is considered misuse. To avoid misuse, the operating
instructions must be read and understood before initial operation.
The operating personnel must be qualified.
Attention!
Modifications and changes to the welding device are prohibited! They endanger people and
can lead to damage to the welding device.
The use of the welding device for purposes other than those for which it is intended and the
failure to observe the safety regulations or the operating instructions exclude the
manufacturer's liability for any resulting damage to persons or objects and invalidate the
warranty!
Danger in case of misuse!
Misuse of the welding machine can lead to dangerous situations.
➜
Only operate the welding machine in the power range listed in the technical data.
➜
Never bypass or override the safety devices.
➜
Operate the welding machine only in technically perfect condition.
➜
Use only original spare parts.
