RehabMedic Magneto Pro 100, User Manual

Page: 59 / 64

57 Rev.02.17 del 27.10.2017
Once the treatment is completed, does the device turn off automatically?
Certainly. In the “setup” menu there is the “auto turning off” entry that you can set from 1 to 20
minutes.
USABILITY OF THE DEVICE
Must the device be recharged?
No. To ensure a proper emission for all the duration of the treatment, the device is powered ex-
clusively by the network with the appropriate power supply.
The device does not turn on, what can I do?
Connect the power supply and hold the “ok” button for 4 seconds.
Why can not I set the gauss?
To create a successful communication between the solenoids and the central unit, the device
must be turned on after connecting the solenoids to input channels and then set the gauss.
Is it possible to use the magnetotherapy in the presence of a prosthesis?
Certainly. However, we recommend that you consult your specialist.
Is it possible to use the magnetotherapy in the presence of a prosthesis?
Certainly. However, we recommend that you consult your specialist.
Are the programs already preset?
Of course. The only parameters to be changed are the gauss and the duration of the treatment.
The parameters are set in the user manual, section “Program List”.
Does the PEMF devices emit at low frequency?
Of course. The MagnetoPRO 100 emits pulsed electromagnetic fields at low frequency.
What is the duty cycle?
The duty cycle indicates the period of emissions per second. If the duty cycle is set to 50%, the
device emits in a pulsed way. In a period of 1 second, the device emits for 0.5 seconds and the
remaining 0.5 seconds it does not emit.
What is the fn button?
The “fn” button changes the unit of measurement of the field from Gauss to Millitesla.
Why are the characters not readable?
In the Settings menu, select “Contrast” and with the appropriate keys set the quality of the
reading.