RehabMedic Magneto Pro 100, User Manual

Page: 40 / 64

38 Rev.02.17 del 27.10.2017
B-MAT: this is a mat, consisting of four sections, each of
which can contain four solenoids. The B-Mat is positio-
ned above the traditional mat and is particularly suitable
for treatments during the night or for people with motor
difficulties and bedridden.
In order to purchase these accessories, please contact
your dealer.
INTENDED USE
The estimated useful life of the product is of 5 years. We recommend returning the device to the
manufacturer and/or authorized center every two years for the maintenance and to verify the safety.
MagnetoPRO 100 was designed to be used in the following operating environments:
Domestic environment; Clinics; Physiotherapy centers; Rehabilitation in general; Pain treatments
in general; Aesthetic and sport purposes.
Because of the presence of clinical programs, this product is a medical device. Therefore it is certi-
fied by the Notified Body Kiwa Cermet Italia S.p.A. No. 0476 according to the 93/42/CEE European
directive for medical devices. The certification covers clinical applications. CE0476 does not refer
to non-medical treatments.
CONNECTIONS
DEVICE
MagnetoPRO 100 operates connected to the mains. In
order to connect the power supply to the connector, plug
it as shown below.
ATTENTION: If the packaging, the cable or the connector of the power supply unit have signs of
wear or damage, the device should be immediately replaced.
CONNECT THE DIFFUSERS
In order to connect the diffusers to the
device, plug them into the intended in-
lets on the top of the device (see picture).
Cables should be inserted with grooves
downwards.
ATTENTION: Do not unplug the solenoids (diffusers) if the unit is working.
IP22
Warning.
This symbol on your device indicates that it complies
with the directives on medical devices (93/42/CEE
47/2007CEE). The number of the notified body is 0476.
Product manufactured in compliance with the 2011/65/
EU Directive.
It informs the operator that before using the device he
must read the manual.
It indicates the protection against water ingress.
It informs the operator of a compulsory conduct.
It refers to the manufacturer.
0 4 7 6
LABELLING AND SYMBOLS