How to assemble your unit
Assembly of the USTIM unit is very
easy and requires only five steps.
STEP 1 - BATTERIES:
Remove the
battery cover and insert two batteries,
as shown on the diagram inside the
battery compartment. Re-apply the
battery cover.
Note: Your unit will not function if the
batteries are inserted incorrectly. To
check, press the ON/OFF button
once and the LCD display will start
up. After performing this check, press
the button again to switch the unit
off.
CAUTION: There is a risk of
explosion if the batteries are fitted
incorrectly. Replace with AA Alkaline
1.5 volt batteries. Do not mix old and
new batteries. Do not dispose of the
batteries in a fire; keep them out of
reach of children. The batteries must
be removed from the device before it
is scrapped and that they are
disposed safely.
Example of electrodes
placement
over the PECTORALS.
Wave shape BIPHASIC
21 50
USTIM - User’s manual Rev. 2(10/19/2012)
