Rehabed LEO Instructions For Use Manual Download Page 51 | Manualshive

Page: 51 / 56

Rehabed LEO Instructions For Use Manual Download Page 51

51

▪

Pay particular attention when raising/lowering side rails – if a
grab rail is applied – the space between these two components
may pose a risk of crushing fingers.

▪

Take care when raising the back section in combination with the
grab rail, because the space between these two elements may
pose a risk of finger(s) entrapment.

▪

If the height extension for side rails is used along with a foam
mattress, make sure that the patient’s entry/exit is not difficult
– otherwise, during the change of the patient’s position,
remove and reinstall the height extension (as required).

16.1.

M

ATTRESS AND SIDE RAILS

Leo bed has been tested and approved with listed below mattresses. The mattresses
listed below are mattresses recommended by the manufacturer. Contact your
distributor, importer or manufacturer to select a mattress suitable for your bed.

Mattresses have been tested and approved with side rails characterized by specific
dimensions dedicated to the Leo bed (see section 15.3).

Dimensions [mm]

width x length x thickness

Density
[kg/m

3

]

Foam Mattresses

Hyper Foam Plus

800x2000x140; 850x2000x140; 900x2000x140;
1100x2000x140

35/38*

Hyper Foam 2

800x2000x150; 900x2000x150; 1100x2000x150

35/45/50*

Hyper Foam Maxx 250

900x2000x140; 1100x2000x180

35/50/50*

Hyper Air Hybrid

900x2000x160

35/50+50/38*

Memocare

900x2000x140

33/35/50*

EVAQ-PRO

900x2000x140; 900x2000x150

35/38*

Waffle Mattress

780x2000x120; 850x2000x120; 900x2000x120;
900x2000x150; 1100x2000x150

25

Waffle Mattress

850x2000x140

35

Waffle Mattress with HR
filling

780x2000x120 850x2000x120; 900x2000x120;
900x2000x150

35

Foam Mattress

780x2000x120; 800x2000x120; 850x2000x120;
900x2000x100; 900x2000x120; 900x2000x150;
900x2000x200; 1100x2000x120

25

Foam Mattress

900x2000x120; 900x2000x150; 1100x2000x150

35

Foam Mattress with HR
filling

900x2000x150

35

Mattress extension

780x200x120; 900x200x120; 900x200x140;
900x200x150

25

* The values refer to the density of individual layers of mattress.

«
...
49
50
51
52
53
...
»

Summary of Contents for LEO

























































Reviews:

No comments