Rehabed LEO Instructions For Use Manual Download Page 47 | Manualshive

Page: 47 / 56

Rehabed LEO Instructions For Use Manual Download Page 47

47

15.

S

PECIFICATION

15.1.

B

ED DATA

Leo L

Leo S

Leo M

Leo

Wide

Leo

with with

integrated

length

extension

Overall length [mm]

2060

2060

2060

2075

2060/2260

Overall width [mm]

1050

1070

1070

1270

1070

Mattress platform height range [mm]

315 - 785

300 - 770

315 - 785

Under bed clearance (up to the metal
frame) [mm]

145

130

145

Mattress platform length [mm]

2000

2000/2200

Mattress platform width [mm]

900

1100

900

Backrest section tilt [°]

68

Thigh section tilt [°]

28

Calf section tilt [°]

21

Maximum calf section height [mm]

140

Trendelenburg tilt [°]

0 - 15

reverse-Trendelenburg tilt [°]

0 - 17

Part weights [kg]

Mattress platform

35,6

49

38,6

Bed lift

50

48

50

Bed end (each)

8,7

10,2

8,7

Side rails (set)

10,5

21,8

13

10,5

21,8

Overall bed weight [kg]

103

117,4

106

Overall bed weight with side rails [kg]

113,5

124,8

116

127,9

127,8

Particular dimensions and weights may vary depending on the version of the bed and accessories. The bed
data identify the maximum angles which can be achieved in normal use by each part of the mattress support
platform with reference to horizontal. Mattress platform height is defined as the maximum and minimum
height from the floor which can be achieved by the mattress support platform in normal use.

If patient requirements are such that Trendelenburg functionality is
deemed to pose a potential risk a replacement handset can be purchased
with the Trendelenburg function removed.

15.2.

M

AXIMUM LOAD

Leo

Lifting pole

Safe working load

215 kg

80 kg

Maximum User weight

178 kg

-

The safe working load is the sum of the weight of: patient/user, mattress, accessories, loads carried by

accessories (excluding the patient’s weight).

The above-listed maximum loads refer to a bed used by one person
only. The bed is not designed to carry the weight of guests seated at
the side of the bed. Additional weight can damage components or
make the bed unstable – creating a risk of injury.

«
...
45
46
47
48
49
...
»

Summary of Contents for LEO

























































Reviews:

No comments