11
After the original digits were altered, the following operations were performed on the
test-object: grinding, spackling, dressing, priming, two-layer spray-on painting with aerosol
motor enamel using the technique of cold drying in accordance with the repaired coating type .
Photographic image of the investigated test-object surface
Figure 2
Marking
Device marking is performed in the form of a label on the rear side of the PC panel .
The marking label provides the following information:
z
manufacturer’s name and/or trade mark,
z
symbolic notation of the device,
z
device serial number in compliance with the numbering system of the manufacturer,
z
date of manufacturing (year and month),
z
rated voltage, V,
z
rated current, A,
z
nominal frequency, Hz,
z
technical conditions marking,
z
national certification mark .
Device sealing is made with the help of destructible security labels applied on the Optic-
Mechanical Block body and on the device chassis . Damages of the security label cause a loss
of warranty .
Folder with documents is labeled on the cover .
SPRK is labeled on the repair kit’s bag .
Packing
Device hardware is packed in the body-case . Software and a set of operational documents
are enclosed in a documents folder . SPRK is packed in a bag .
The device is transported and stored in a special wooden box . Device special equipment is
arranged in conformity with Table 1 .
Description and Operation of the Device Components
USB-device for Magneto-Optical Visualization (MOV)
Functions
1.1.6
1.2.1
1.1.7
1.2
z
Magneto-optical visualization of a physical copy from MT .
z
Transforming a visualized image into a digital TV signal .
z
Changing frames due to step-by-step movement of MT in the tape drive mechanism
with further automatic stitching .
z
Indicating current system status .
Summary of Contents for 7505M
Page 2: ......
