16
User’s Guide
Document Reader Regula 70X4M.XXX
INTENDED USE
Operating Restrictions
2.1.1 The device must be used under the requirements specified
in paragraph 1.1 of this Guide.
2.1.2 DO NOT USE THE DEVICE WITH A USB CABLE, DIFFERENT
FROM THE SUPPLIED.
2.1.3 DO NOT SWITCH ON THE DEVICE IN
THE
CASE OF MALFUNCTION.
2.1.4 DO NOT DISMANTLE THE DEVICE AND CLEAR DEFECTS
ARISEN DURING ITS USE WITHOUT ASSISTANCE.
2.1.5 Strictly observe the electric and fire safety rules when
operating the device.
2.1.6 Do not remove the manufacturer’s seals from the device
parts during the warranty period.
2.1.7 Do not use the device in case it is not calibrated
(see Appendix A), or its object-plate is dirty (paragraph 3 of this Guide).
2.1.8 Do not use the device closer than 20 cm (8 inches) from any
light-emitting devices, including similar devices.
2.1.9 When operating the device, take measures to prevent con
-
densation on the object-glass. When placing the device to a room
with a higher temperature, keep it in this room for two-three (
2-
3) hours before its operation.
2.1.10 Do not use any additional power supply sources except for
those that are supplied by the manufacturer.
Preparing the Device for Use
2.2.1 Safety measures
Strictly observe the requirements of paragraph 2.1 when preparing
the device for use.
2.2.2 Putting the Device into Operation
1. Open the package, take out the device, and check the device
completeness under paragraph 1.3.
2. Ensure the device has no mechanical damages, and the object-
plate
(2)
is clean (fig. 1).
2.2.3 Preparing the Device for Operation
2.2.3.1 Adjusting the PC for operation with the device:
1) turn on the PC under the manufacturer’s documentation;
2) load the OS and Log in as the PC Administrator;
2
2.1
2.2