14
User’s Guide
Document Reader Regula 70X4M.XXX
A standard USB cable (for connecting the device to a PC) can be
connected to the socket
(7)
.
ATTENTION!
When using socket 8
it is obligatory
to connect an additional
power supply source to socket 6.
The power supply source + 5V, 3A can be delivered by
customer request.
If other power supply sources are used, the Manufacturer
is not responsible for the device safety and operation.
The use of socket 8, when operating the device, may affect
the device.
The RFID reader is inside the device. The read-out area covers
both passport pages.
A smart-card reader
(9)
located on the back panel of the device
body (fi g.2).
1.4.3
Device Operation
Operating modes (illumination) of indicator
(5)
are set by User’s
application (see Programmer’s Guide DR SDK, chapter 6.8).
The device works with the PC in two modes:
standby mode;
scanning mode.
Figure 2
9
8
6
7