Regency IP28 Gas Inbuilt Fireplace
11
INSTALLATION
MOCK FIREPLACE KIT (ZERO CLEARANCE) INSTALLATION
918-971
11/24/10
1
IP28
490mm
702m
m
450mm
770mm
770mm
MOCK FIREPLACE KIT (ZERO CLEARANCE) INSTALLATION
Zero Clearance Kit
6
Standoffs
2
Side Brackets
1
Insulation Blanket
COMBUSTIBLE MOCK FIREPLACE KIT INSTALLATION:
Minimum cavity size for Low profi le faceplate:
702mm Height x 770mm Width x 490mm Depth
Minimum cavity size for Contemporary faceplate:
702mm Height x 770mm Width x 450mm Depth
VENTING CLEARANCES: 10mm is required all around
venting
INSTALLATION OF MOCK FIREPLACE KIT:
1)
Install top two 110 mm stand offs to the top of unit.
Install two 67 mm stand offs to the back of unit - install two 55 mm stand offs to the each side of unit.
2)
Install left and right side nailing fl ange.
3)
Lay insulation blanket on top of unit so it is fl ush and tight against backside of faceplate.
4)
Unit is now ready for install into a combustible cavity that has the above mentioned clearances.
10mm
Top standoffs x 2
Back standoffs x 2
Insulation blanket
Side standoffs x 2
1 on each side
Side Nailing Flange x 2
1 on each left & right
490mm
702mm
490mm
770mm
770mm
NOTE: Please adjust nailing fl anges in relationship to either Contemporary or Low Profi le Faceplate. Faceplate needs to be fl ush against fi nished wall.
Low Profi le Fascia
Contemporary Fascia
