Regency Horizon HZ54E Gas Fireplace
39
INSTALLATION
DFBC
= digital fi replace burner control
1)
Remove glass door to access to DFBC & battery pack tray.
2)
Lift DFBC and battery pack up and out.
GT REMOTE INSTALLATION
3)
Disconnect connector from battery holder and remove from tray –
(battery holder is attached by Velcro to tray).
4)
Remove the 4 AA batteries if installed, reconnect the connector to the
battery pack and put back onto Velcro strip
5
) Locate the Green and White wires from the DFBC module wire harness;
connect the spade connectors from the receiver wire harness, (TH)
Green to (DFBC) Green and (TH/TP) White to (DFBC) White
Note:
DO NOT USE 4 AA batteries in the battery pack on the tray - the
DFBC is now powered by the receiver batteries in the wall.
6)
Locate the DFC wire from the receiver wire harness and connect to the
DC supply wire from the DFBC.
